Signal Conditioners/Pulse Amplifiers

We offer a full line of signal conditioners 0-10V, 0-5V, 4-20mA and pulse amplifiers

Get Application Guidance View Catalog

Vs. Supply Voltage	9.0 VDC Min. 0-5 Vout, FTV 11.0 VDC Min. 0-10 Vout, FTV 38.0 VDC Max.
Input Protection	50 VAC, reversed leads
Output Protection	Short to +VDC, common or signal out continuous
Frequency Input Range	F Hi: Adjustable full scale: 1100 Hz to 10 kHz F Lo: Adjustable to full scale: 75 Hz to 10 kHz
Input Sensitivity	Mag: 5 mVpp to 100 mVpp Digital: 0 - Vs (50 V max.) TTL
Output Settling Time	Full scale change to 95% of final value 180mS
Output Ripple & Noise	5mVp-p, <2 mVrms, 5% of FS
Temperature Coefficient	77° to 104°F, 0.13% / °C, on 10 V range
Operating Temperature Range	-40 °F to 160 °F
ZERO / SPAN Adjustment Interaction	< 1%
Two Wire Version	Jumper 1 to 3 installed
CE-compliance	EN55011, EN50022-2
Terminal Connections	1. Input VDC 2. Common 3. Signal out 4. Mag Pick up 5. Mag Pick up 6. Digital Signal Input

Description
Our line of converters and signal amplifiers have been configured to fit a compact “Y-3” explosion proof enclosure. Input and output configurations are field selectable to fit most applications.

ZERO and SPAN adjustments permit calibration to any measurement range with minimal interaction between the adjustments.

The converters and amplifiers will accept frequency input from any mag pick up or digital pick up (digital mag, RF, Hall effect, zero speed, “smart” etc…)
Documentation

FIC712-2 Data Sheet
PA714 Data Sheet
PT420 Data Sheet

Analog & Digital Signal Conditioners

Pulse Amplifier

PA714

Meter mounted pulse amplifier, conditions a low amplitude signal developed by a magnetic pickup coil.

Signal Conditioner

FIC712-2

The FIC712-2 is a 2-wire loop-powered analog transmitter designed to linearly convert a frequency input to an equivalent 4-20mA current output.

Signal Conditioner

PT420

The PT420 Frequency Converter is a microcontroller-based rate/totalizer designed for both, Liquid and Gas Applications.

Support and Service

Our full-time, dedicated service group offers prompt reliable technical support services such as; evaluation, repair and recertification for flow meters including a competitor’s product. Onsite calibration services are performed by our experienced technicians proficient in using the latest test equipment.

If your application requires unique meter and instrumentation features our engineering team will design the appropriate custom equipment.

Our extensive inventory permits rapid shipment with industry leading delivery times, thus minimizing expensive down time.

Certifications

ISO9001, AS9100, 3A, NIST, NTEP, CTEP, OIML R81/R117/MID, CSA, Intrinsic Safety and Canadian CRN

Worldwide Support

Turbines, Inc. serves customers worldwide with U.S. offices in Cranston, RI (headquarters); Odessa-Midland, TX; Altus, OK; Seneca, SC; and Edmonton, Alberta (Canada).

Not Sure Where to Start?

We can help guide you to the correct solution for your business needs, whether you are looking for product information, data sheets, repair information we are available to help!

Our Network of Companies