Skip To Content
search mail_outline [email protected] call 1.800.809.1387

Coriolis Flow Meters

Mass Flow Measurement For Liquids & Gases

Coriolis flow meters

Turbines, Inc. Coriolis mass flow meters provide direct mass flow measurement for liquids and gases while simultaneously measuring density and temperature. Designed for demanding industrial applications, our TCM Series delivers high-accuracy measurement without relying on changes in pressure, temperature, or fluid properties to calculate flow.

With liquid measurement accuracy up to ±0.1%, the TCM Series is well suited for applications where precise mass flow measurement, repeatability, and process control are critical. Coriolis technology measures mass flow directly, making it an effective solution for fluids with changing density, viscosity, temperature, or composition.

Get Application Guidance
Coriolis flow meters

Product Catalog

Coriolis flow meters

Coriolis Mass Flow Meters

TCM Series

Accuracy +/- 0.1% of rate (liquids) +/- 0.5% (gases)
Wide Temperature Application -40°F to +212°F
Repeatability of 0.05%

  • Line sizes from DN15 mm to 1/2″
    Flow rates from up to 8,450 lbs/min
    Pressures up to 1,450 psi
flow monitor for Coriolis flow meter

Coriolis Transmitter

TCE 8000 (Wall or Meter Mounted)

The TCE 8000 / 8100 is an economical multi-variable Coriolis
transmitter that can output flow rate, total, density or temperature.

With hazardous area approvals: ATEX, IECEx, cCSAus.
signal transmission for Coriolis flow meter

Coriolis Transmitter

TCE 6000 (Meter Mounted)

Multi-variable Coriolis transmitter that can output flow rate, total, density
or temperature. Ready for ESTA applications.

Data Sheets

picture_as_pdf TCM028K Data Sheet
picture_as_pdf TCM065K Data Sheet
picture_as_pdf TCM230K Data Sheet
picture_as_pdf TCM0325 Data Sheet
picture_as_pdf TCM0650 Data Sheet
picture_as_pdf TCM1550 Data Sheet
picture_as_pdf TCM3100 Data Sheet
picture_as_pdf TCM5500 Data Sheet
picture_as_pdf TCM7900 Data Sheet
picture_as_pdf TCE6000 Data Sheet
picture_as_pdf TCE8000 Data Sheet

About The TCM Series Coriolis Mass Flow Meter

Frequently Asked Questions

A Coriolis mass flow meter measures the mass flow rate of a fluid directly by detecting changes in vibration caused by the fluid moving through vibrating tubes. The Coriolis effect causes the tubes to twist, called a phase shift. The amount of twist correlates with the mass flow.

Coriolis meters can measure liquids, gases, and slurries, including viscous fluids, cryogenic liquids, corrosive chemicals, fuels, and food-grade products like syrup or milk.

Yes. Coriolis meters are among the most accurate flow meters available, typically offering mass flow accuracy of ±0.1% or better, and density measurement accuracy of ±0.0005 g/cm³.

Yes. Besides mass flow, Coriolis meters can also measure the fluid density and temperature (with temperature sensors) at the same time, providing valuable multi-variable data for process control.

No. One of the advantages of Coriolis meters is that they do not require long straight pipe runs upstream or downstream, unlike many other flow technologies. They can be installed in tight spaces without sacrificing accuracy to measure flow through the tube.

  • Higher cost compared to other flow meter types.

  • Pressure drop can be significant for high-viscosity fluids.

  • Installation may require support for the meter’s weight, especially in larger sizes.

  • Vibration sensitivity: External vibrations can affect readings if not properly isolated.

Coriolis meters require minimal maintenance because they have no moving parts. Maintenance mainly involves:

  • Periodic calibration checks.

  • Ensuring the sensor tubes stay clean if fluids can cause buildup.

  • Firmware updates or diagnostic checks via the transmitter.

Related Products

Turbines, Inc. offers a full complement of parts and accessories including internal kits, bearings, cables, batteries and more to provide complete refurbishing of any of our products. Additionally, because we are a complete manufacturing enterprise we can repair most competitors meters also.

Accessories

Turbines, Inc. offers a full complement of parts and accessories including internal kits, bearings, cables, batteries and more to provide complete refurbishing of any of our products.

View Products
turbine-flow-meter-group-shot

Turbine Flow Meters

Our turbine flow meters offer seamless operation with minimal maintenance, and cover flow ranges from 0.3 to 12,000gpm

View Products
differential pressure flow meters

DP Flow Meters

Differential pressure flow meters operate by measuring the pressure drop across a constriction in the flow path, which correlates to flow rate.

View Products

Need To See More Flow Meters?

View All Flow Meter Technologies

Need help finding a flow meter?

We can help guide you to the correct solution for your business needs, whether you are looking for product information, data sheets, repair information we are available to help!

Our Network of Companies

Turbines, Inc.
Turbinesinc-Odessa,LLC
Primary Flow Signal Canada
Primary Flow Signal