TCE 8000 Coriolis Transmitter
The TCE 8000 / 8100 is an economical multi-variable Coriolis transmitter that can output flow rate, total, density or temperature. With hazardous area approvals: ATEX, IECEx, cCSAus.
- Specifications
Supply Voltage 24 VDC or 100-240 VAC (version dependent) Power Consumption 4 W (DC), max. 11W (AC) Display Back-lit LCD screen | 132 x 32 dot
Programmed via front keyboard or ModbusReverse Polarity Protection
Yes Galvanic Isolations
2,500 VAC Interfaces
RS485 (Modbus RTU), HART®, Foundation Fieldbus®
Cable Glands
Suitable for 7-13 mm cables | Material: Brass/Ni plated (option: 316SS (1.4404 AISI))
Thread: 2 x 1/2” NPT or 2 x M20 x 1.5
Housing Material
Aluminum standard | 316L Stainless Steel (1.4404 AISI) optional
Protection Class
IP65 (IP66/IP67 on request) Ambient Temperature
AC: -40 to 122°F (-40 to 50°C); DC: -40 to 158°F (-40 to 70°C) Connectivity
Cage clamp terminals Current Outputs (2x)
4-20 mA passive
Output Value (programmable) flow, total mass, total volume, density, temperature Frequency Range .5 - 10,000 Hz Output Signal Active push-pull outfut for flow rate Status Output Push pull programmable:
in TOTAL mode: 0.5 - 100 Hz; in FREQUENCY mode: 0.5-10,000 Hz
Control Input Programmable Input Type 4-20 mA active for two-wire passive pressure sensor - Description
The TCE 8000 is an economical multi-variable Coriolis transmitter that can output flow rate, total, density or temperature. It ships factory-configured for fast commissioning. TCE 8000 units are available in local mount or wall mount depending on your requirements and have hazardous area approvals: CSA (US & Canada), ATEX, IECEx, EAC (TR-CU), and KGS.
- Documentation
Support and Service
Our full-time, dedicated service group offers prompt reliable technical support services such as; evaluation, repair and recertification for flow meters including a competitor’s product. Onsite calibration services are performed by our experienced technicians proficient in using the latest test equipment.
If your application requires unique meter and instrumentation features our engineering team will design the appropriate custom equipment.
Our extensive inventory permits rapid shipment with industry leading delivery times, thus minimizing expensive down time.
Certifications
ISO9001, AS9100, 3A, NIST, NTEP, CTEP, OIML R81/R117/MID, CSA, Intrinsic Safety and Canadian CRN
Worldwide Support
Turbines, Inc. serves customers worldwide with U.S. offices in Cranston, RI (headquarters); Odessa-Midland, TX; Altus, OK; Seneca, SC; and Edmonton, Alberta (Canada).
Need help finding a flow meter?
We can help guide you to the correct solution for your business needs, whether you are looking for product information, data sheets, repair information we are available to help!
Our Network of Companies
