HVT Fabricated Venturi Flow Meter (HVT-FV)
+/- 0.50% Uncalibrated Uncertainty
Low Loss, Municipal & Industrial Applications
- Line Size: 1/2 to 144 inches.
- Headloss % of Differential: 3.50 to 10.0 percent
- Recommended pipe Reynolds number: Greater than 75,000
- Specifications
Line Size 1/2 to 144 inches. Larger sizes available upon request. Head loss % of Differential 3.50 to 10.0 percent Basic Accuracy (% of Total) +/- 0.25 (Calibrated) +/- 0.50% (2 Sigma) (Uncalibrated) Recommended pipe Reynolds number Greater than 75,000 Required Straight Piping Consult PFS datasheet Beta Range 0.30 through 0.75 Useful Service Life Very Long Service Functional Limits Clear liquid, gas, contaminated and solid-bearing line fluid Applications Raw Water, Wellfields, WTP Influent / Effluent, Pumping Stations, Water Distribution, Billing, Reclaimed Water Common Materials Carbon Steel, Stainless Steel, Chrome Moly Other Available Materials not limited to Aluminum, Zirconium, Hastelloy, Monel, Duplex SS, Titanium, Tantalum, 321SS - Description
The HVT Fabricated Venturi Flow Meter offers substantial design and engineering flexibility with end arrangements. (flanged, mechanical joint, weld end, etc.) combined with various body materials and coatings to achieve pressure, temperature, flow range, line fluid, line size, laying length and cost objectives as dictated by the specific applications.
In addition to the conventional application of the Fabricated Venturi meter, the Sealed Metering System (HVT-SM) allows measurement of solids bearing or contaminated line fluids, as well as higher viscosity liquids.
Flow Masters can be added to further extend the intrinsic benefits of the HVT flow meter by providing fully integrated control, management, and reporting capabilities.
- Documentation
Additional Images, Charts, or Drawings
Support and Service
Our full-time, dedicated service group offers prompt reliable technical support services such as; evaluation, repair and recertification for flow meters including a competitor’s product. Onsite calibration services are performed by our experienced technicians proficient in using the latest test equipment.
If your application requires unique meter and instrumentation features our engineering team will design the appropriate custom equipment.
Our extensive inventory permits rapid shipment, typically within 24 hours, thus minimizing expensive down time.
Certifications
ISO9001, AS9100, 3A, NIST, NTEP, CTEP, OIML R81/R117/MID, CSA, Intrinsic Safety and Canadian CRN
Worldwide Support
Turbines, Inc. serves customers worldwide with U.S. offices in Cranston, RI (headquarters); Odessa-Midland, TX; Altus, OK; Seneca, SC; and Edmonton, Alberta (Canada).
Need help finding a flow meter?
We can help guide you to the correct solution for your business needs, whether you are looking for product information, data sheets, repair information we are available to help!
Our Network of Companies
