LF Series - Low Flow Turbine Meter

+/- 0.25% Repeatability of rate
Wide Temperature Application -70°F to +450°F
Highly configurable materials of construction

  • Line sizes 0.5 inches
  • Flow rates from .007 to 3 gpm
  • Pressure up to 5,000 psig *consult factory for higher pressure applications

Description

The LF Series from Turbines, Inc. offers measurement capability from .007 to 3 GPM. The LF Series is designed to operate in clean low viscosity fluid applications.

The Low Flow Series meter can handle working pressures up to 5000 psig (based on end connection used) and delivers +/‐ .25% repeatability over the specified flow range. Every LF series meter manufactured by Turbines Inc., has a 20pt NIST traceable calibration performed that documents the meter’s unique performance. For additional outputs or local indication the LF Series can be combined with one of our linearized signal conditioners or rate indicator totalizers.

Specifications

Line sizes
0.5 inch
Repeatability
+/- 0.25 % over flow range
Operating Temperature
-70° F to +450° F
(consult factory for lower temperatures)
Connection
AN Flare or NPT
(Consult factory for additional process connection options)
Flow Rates
From 0.007 to 3 GPM
Materials
Meter Body: 316 stainless steel, others available upon request
Meter Rotor: 17-4PH, Nickel 200, Duplex Stainless Steel (consult factory for other options)
Rotor Shaft: 316 SS
Bearings: 440C Stainless Steel raceway and balls, self-lubricating retainer, sleeve bearings
Certifications
ISO 9001, AS 9100
Applications
Fuel Flow Metering, Leak Detection, Fuel Additives, Blending of Chemical Additives, Measurement of Pharmaceutical Compounds, Anti-foam for down-hole injection, Refrigerants, Solvents.
Additional lnformation
Full line of economical Retrofit Kits are available
Factory refurbishment available

Support and Service

Our full-time, dedicated service group offers prompt reliable technical support services such as; evaluation, repair and recertification for flow meters including a competitor’s product. Onsite calibration services are performed by our experienced technicians proficient in using the latest test equipment.

If your application requires unique meter and instrumentation features our engineering team will design the appropriate custom equipment.

Our extensive inventory permits rapid shipment, typically within 24 hours, thus minimizing expensive down time.

Certifications

ISO9001, AS9100, 3A, NIST, NTEP, CTEP, OIML R81/R117/MID, CSA, Intrinsic Safety and Canadian CRN

 

Worldwide Support

Turbines, Inc. serves customers worldwide with U.S. offices in Cranston, RI (headquarters); Odessa-Midland, TX; Altus, OK; Seneca, SC; and Edmonton, Alberta (Canada).