Providing Reliable Flow Measurement since 1983

Signal Conditioners/Pulse Amplifiers

We offer a full line of signal conditioners 0-10V, 0-5V, 4-20mA and pulse amplifiers.

Request Pricing

Description

Our line of converters and signal amplifiers have been configured to fit a compact “Y-3” explosion proof enclosure. Input and output configurations are field selectable to fit most applications.

ZERO and SPAN adjustments permit calibration to any measurement range with minimal interaction between the adjustments.

The converters and amplifiers will accept frequency input from any mag pick up or digital pick up (digital mag, RF, Hall effect, zero speed, “smart” etc…)

Specifications

Vs. Supply Voltage
9.0 VDC Min. 0-5 Vout, FTV
11.0 VDC Min. 0-10 Vout, FTV
38.0 VDC Max.
Input Protection
50 VAC, reversed leads
Output Protection
Shrot to +VDC, common or signal out continuous
Frequency Input Range
F Hi: Adjustable full scale: 1100 Hz to 10 kHz
F Lo: Adjustable to full scale: 75 Hz to 10 kHz
Input Sensitivity
Mag: 5 mVpp to 100 mVpp
Digital: 0 - Vs (50 V max.) TTL
Output Settling Time
Full scale change to 95% of final value 180mS
Output Ripple & Noise
5mVp-p, <2 mVrms, 5% of FS
Temperature Coefficient
77° to 104°F, 0.13% / °C, on 10 V range
Operating Temperature Range
-40 °F to 160 °F
ZERO / SPAN Adjustment Interaction
< 1%
Two Wire Version
Jumper 1 to 3 installed
CE-compliance
EN55011, EN50022-2
Terminal Connections
1. Input VDC
2. Common
3. Signal out
4. Mag Pick up
5. Mag Pick up
6. Digital Signal Input

Support and Service

Our full-time, dedicated service group offers prompt reliable technical support services such as; evaluation, repair and recertification for flow meters including a competitor’s product. Onsite calibration services are performed by our experienced technicians proficient in using the latest test equipment.

If your application requires unique meter and instrumentation features our engineering team will design the appropriate custom equipment.

Our extensive inventory permits rapid shipment, typically within 24 hours, thus minimizing expensive down time.

Certifications

ISO9001, AS9100, 3A, NIST, NTEP, CTEP, OIML R81/R117/MID, CSA, Intrinsic Safety and Canadian CRN

 

Worldwide Support

Turbines, Inc. serves customers worldwide with U.S. offices in Cranston, RI (headquarters); Odessa-Midland, TX; Altus, OK; Seneca, SC; and Edmonton, Alberta (Canada).